The best OBS settings for streaming start with two numbers: your real upload speed and your graphics card. Set CBR rate control, a 2 second keyframe interval, 160 kbps AAC audio at 48 kHz, and a hardware encoder that matches your GPU. Then set your bitrate to 70 to 80 percent of your measured upload speed, capped at your platform limit. For most UK streamers that means 4,500 to 6,000 kbps at 1080p.
Start With Your Upload Speed, Not a Preset
Every “best OBS settings” table that hands you one bitrate is guessing. Your upload speed decides your bitrate, and UK upload speeds vary far more than download speeds. The median UK upload speeds in the first half of 2026 were about 35 Mbps on Virgin Media, 18.3 Mbps on BT and 17.9 Mbps on Sky, according to ISPreview.
Run a speed test on a wired connection, then take 70 to 80 percent of the upload result. That is your ceiling, because the rest is needed by the game, Discord, and Windows itself.
Use a wired Ethernet connection. Wi-Fi adds packet loss and latency spikes, the most common cause of dropped frames. Our guide to Ethernet vs Wi-Fi for gaming explains how to test your own ping and jitter and why a powerline adapter beats Wi-Fi when you cannot run a cable.
OBS Settings by UK Upload Speed
| Your upload speed | Resolution and frame rate | Video bitrate | Best for |
|---|---|---|---|
| Under 5 Mbps | 720p at 30 fps | 2,500 to 3,000 kbps | Talking streams |
| 5 to 10 Mbps | 720p at 60 fps or 1080p at 30 fps | 3,000 to 4,500 kbps | Most UK fibre homes |
| 10 to 20 Mbps | 1080p at 60 fps | 4,500 to 6,000 kbps | Fast games on Twitch |
| 20 Mbps and above | 1080p at 60 fps, or 1440p on YouTube | 6,000 to 12,000 kbps | YouTube and Kick |
Pick the Right Encoder for Your Graphics Card
The encoder turns raw gameplay into a video stream. Pick it by your hardware, not by habit. A hardware encoder runs on a dedicated chip and costs almost no frame rate, while a software encoder runs on your CPU and can steal frames from your game.
| Your hardware | Encoder in OBS | Preset |
|---|---|---|
| NVIDIA GTX 10 series or newer | NVENC H.264 | P6, High Quality tuning |
| NVIDIA RTX 40 series | NVENC AV1 (YouTube only) | P6, High Quality tuning |
| AMD RX 6000 or 7000 series | AMD AMF H.264 | Quality |
| Intel Arc or 11th gen Core and newer | QuickSync H.264 | Quality |
| No usable GPU encoder | x264 | veryfast |
On NVIDIA cards, OBS 28.1 replaced the old named presets with P1 to P7. P6 with High Quality tuning and Quarter Resolution multipass is the sweet spot. RTX 40 series cards also support AV1 encoding, which gives better quality per bit, but Twitch does not accept AV1 yet, so keep AV1 for YouTube only.
x264 on veryfast is the fallback when no hardware encoder is available. It gives good quality per bit, but it is CPU heavy, and if your game already uses most of your CPU, x264 will cause skipped frames. Our guide to PC graphics settings explained shows how to free up headroom by turning down the settings that cost the most frames.
Bitrate by Platform: Twitch, YouTube and Kick
The three platforms do not share one ideal bitrate. Twitch caps standard ingest at about 6,000 kbps, so sending more is wasted. YouTube accepts up to about 12,000 kbps at 1080p60, and Kick sits between the two.
| Output | Twitch | YouTube Live | Kick |
|---|---|---|---|
| 720p at 30 fps | 3,000 kbps | 2,500 to 4,000 kbps | 3,000 kbps |
| 720p at 60 fps | 4,500 kbps | 3,500 to 5,000 kbps | 4,500 kbps |
| 1080p at 30 fps | 4,500 to 6,000 kbps | 4,500 to 6,000 kbps | 6,000 kbps |
| 1080p at 60 fps | 6,000 kbps | 9,000 to 12,000 kbps | 6,000 to 8,000 kbps |
One Twitch trick the big guides rarely mention: 936p or 900p at 60 fps often looks sharper than 1080p at the same 6,000 kbps. If your 1080p Twitch stream looks blocky in fast movement, drop the output resolution to 1600×900.
Set the keyframe interval to exactly 2 seconds on every platform. Twitch requires it, and YouTube recommends 2 seconds with a maximum of 4. Leaving it at 0, the OBS default, can break transcoding or get your stream rejected. Set rate control to CBR on every platform, since live ingest expects a constant bitrate.
Audio Settings That Do Not Need Changing
Audio is the one area where the answer is the same for everyone. Set the sample rate to 48 kHz and the audio bitrate to 160 kbps AAC. That is the standard Twitch and YouTube expect, and it sounds clean for voice and game audio. Going to 320 kbps wastes upload for no audible gain.
If you record while you stream, use separate audio tracks: microphone on track 2, everything else on track 1.
Dropped Frames: Diagnose It Before You Change Settings
Dropped frames have three different causes, and each one needs a different fix. Open the OBS Stats window, View then Stats, and look at which counter is rising.
Dropped frames are rising. This is a network problem: your connection cannot push the bitrate you set. First, lower your bitrate by 1,000 kbps and test again. Second, switch from Wi-Fi to a wired connection. Third, check whether someone else in the house is uploading or on a video call. If none of that helps, run the TwitchTest tool to find the fastest ingest server, then set it manually in Settings, then Stream, instead of using Auto.
Skipped frames due to encoding lag are rising. This is an encoder problem: your GPU or CPU cannot encode fast enough. On NVENC, drop the preset from P6 to P5, or turn off look-ahead. On x264, move from veryfast to superfast or ultrafast. Also cap your game frame rate below your monitor refresh rate, so the GPU keeps headroom for encoding.
Lagged frames due to rendering lag are rising. This is a GPU overload problem: your game is using the whole graphics card and OBS has nothing left to draw the scene. Turn down the most expensive graphics settings first, usually shadows and ray tracing, or cap the game at 60 fps. Running OBS as administrator also helps, because Windows then gives OBS priority for GPU time.
Fix one counter at a time and test for ten minutes between changes. Changing three settings at once tells you nothing about which one worked.
Frequently Asked Questions
What is the best bitrate for OBS streaming?
There is no single best bitrate. Use 70 to 80 percent of your measured upload speed, capped at your platform limit. For most UK streamers that is 4,500 kbps at 720p60 or 6,000 kbps at 1080p60 on Twitch.
Should I use NVENC or x264 in OBS?
Use NVENC if you have an NVIDIA GTX 10 series card or newer. It costs almost no frame rate and modern NVENC quality is close to x264. Use x264 only when you have no hardware encoder.
What keyframe interval should I use in OBS?
Set it to 2 seconds. Twitch requires exactly 2 seconds, and YouTube recommends 2 seconds with a maximum of 4. Never leave it on 0 for a live stream.
Why does my OBS stream keep dropping frames?
Check the OBS Stats window first. Rising dropped frames mean a network problem, so lower the bitrate or switch to a wired connection. Rising skipped frames mean encoder overload, so lower the encoder preset. Rising lagged frames mean GPU overload, so turn down graphics settings.
Is 1080p60 worth it for streaming on Twitch?
Only if your upload is at least 10 Mbps and your GPU has headroom. Twitch caps ingest at about 6,000 kbps, so 1080p60 can look blocky in fast games. Many streamers get a sharper picture from 936p or 900p at 60 fps on the same bitrate.
Conclusion
If you have not set up your channel yet, our guide on how to start streaming on Twitch covers the console and PC paths, the current Affiliate thresholds, and the UK broadband reality you need to plan around.
The best OBS settings are the ones matched to your connection and your hardware. Test your upload speed, take 70 to 80 percent of it, pick the encoder your graphics card supports, and set CBR with a 2 second keyframe interval.
